Batboard

Hi Folks,

I'm looking for a cable that will do the above.

Before I go digging into schematics & building my own, I thought I'd see if anybody knows the part number, or by chance has schematics.

Perhaps someone has seen one... is it done by splitting a DB-25 cable to feed the two separate systems, or is it done like putting a Siren on an X9000 where the large block connectors plug together.

Thanks!

Tim

Depends on what type of VRS you are working with.

If you are using a VRS-EP then the X9000 T-Block style is what you want. That is a HKN4304. The VRS cable piggy backs to the HKN4304 cable allowing for a pass through of data for each device.

If you are using a VRS750 you need a Y-Cable, the part number is NKN6460 which is still available through Moto, albeit at a price of $300+ depending on supplier.

The HKN6154B cable connects the VRS750 to the siren connector.