Motorola N1016B paging encoder hook up

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
firedog359
Posts: 53
Joined: Sun Feb 24, 2013 2:24 pm
What radios do you own?: MA/COM KMC-300,ICOM F50V

Motorola N1016B paging encoder hook up

Post by firedog359 »

Hello all,I have recently aquired a very nice GE Mastr II VHF high band base station in the 30" deskmate configuration.The unit came from a local rescue squad and it was set up with a GE local controller,desk mic and a Motorola N1016B paging encoder.The problem is,the encoder had been disconnected when the radio was taken out of service and I don't know how to hook it back up.There is a 4 conductor cable with spade terminals coming off the local controller that looks like it might have been hooked to the screw terminals on the encoder but I can't be sure.I have the manuals for the controller and the encoder but each manual only deals with interfacing to their own brands and models.Any help would be greatly appreciated.
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”