XTS3000 Keyload Problems
Posted: Sun Dec 01, 2013 9:19 am
I've got an XTS3000 I'm trying to keyload. It has the NTN8258 module in it, and the radio is R05.51.00.00 DSP N08.03.02 Flash is 180004-000000-6.
I am using a T3011DX KVL, and an OEM cable. It is a Model I radio so I cant put it in self test to tell if the module is being recognized by the radio.
When I attach the keyload cable to the radio, I get a beep, then loose all audio out the speaker. I know on my Astro Sabers, I still get audio with the hirose adapter and keyload cable attached. Is this normal on the 3000? Or do I have an issue somewhere?
I have secure hardware equipped checked, CKR is off, and migrate from securenet is checked. I have 16 hardware keys, in the codeplug. I have played around with the settings I can think to try, and it fails whether I am loading a group, or a single key.
Do I have a firmware issue?
Any help would be appreciated. Thanks
I am using a T3011DX KVL, and an OEM cable. It is a Model I radio so I cant put it in self test to tell if the module is being recognized by the radio.
When I attach the keyload cable to the radio, I get a beep, then loose all audio out the speaker. I know on my Astro Sabers, I still get audio with the hirose adapter and keyload cable attached. Is this normal on the 3000? Or do I have an issue somewhere?
I have secure hardware equipped checked, CKR is off, and migrate from securenet is checked. I have 16 hardware keys, in the codeplug. I have played around with the settings I can think to try, and it fails whether I am loading a group, or a single key.
Do I have a firmware issue?
Any help would be appreciated. Thanks