Page 1 of 1

FRN 5843A

Posted: Sun Dec 15, 2013 11:01 pm
by sb
Hi!

Need info about FRN 5843A that is attached to mine MCS2000.

Image

Image

Image

Re: FRN 5843A

Posted: Mon Dec 16, 2013 7:54 am
by RFguy
What's inside it? The cover should just pop off.

Re: FRN 5843A

Posted: Mon Dec 16, 2013 8:46 am
by sb
Hi!

Inside picture.

Image

Re: FRN 5843A

Posted: Mon Dec 16, 2013 9:14 am
by MSS-Dave
This is a "adaptor" for a CS option on MCS2000. That is the way it is listed on MOL. Still listed as new for about $100 USD. I cannot for the life of me or simple Google-Fu right now tell you what the CS option was however. Radio work without it being attached?

Here is pinout of that device courtesy of Batlabs.com

Pinout for the CS Option Connector

1 A+ CONT
2 +5V
3 2.1 MHz
4 GND
5 DISC
6 9.3
7 AFIC PRE-EMP OUT
8 ASFIC MIC AUD OUT
9 AUX RX IN1
10 UNIV IO
11 GND
12 RESET
13 C CTRL HD2/O KEYFAIL
14 AUX TX IN1
15 RX DATA/KID
16 RTS/DVP WE
17 CLK
18 SPI TX DATA
19 MISO
20 O JABBA INT/C DTMF DATA RDY
21 O JABBA SEL/C DTMF SEL
22 ASN INT/OPT TX
23 ASN SEL/OPT CTSB
24 N/C
25 RSSI

Re: FRN 5843A

Posted: Mon Dec 16, 2013 9:59 am
by fineshot1
Not certain but i think that is a "Control Station" option for "Data" applications.

Re: FRN 5843A

Posted: Mon Dec 16, 2013 10:25 am
by sb
Hi!
Thanks for info. Radio was used in moscad sistem.
I swap it with HLN6412A accessory connector from GM900 and radio is working with that too.
Any chance to get RJ45 pinout ?