Interface a GTR8000 with Siemens Hipath 4000

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
DKRUTSCH
New User
Posts: 1
Joined: Wed Jan 08, 2014 3:33 pm

Interface a GTR8000 with Siemens Hipath 4000

Post by DKRUTSCH »

Has anyone interfaced a GTR8000 with a Siemens Hipath 4000 system via TRC (tone remote control)? I'm having issues with determining which port on the GTR8000 to actually access via TRC. I'm thinking it's a four wire configuration as opposed to the six wire configuration the Hipath usually uses. I'm running conventional not mixed mode if that matters. Any thoughts would be welcome.
Top
User avatar
d119
Posts: 3538
Joined: Tue Mar 19, 2002 4:00 pm

Re: Interface a GTR8000 with Siemens Hipath 4000

Post by d119 »

Is the GTR8000 a conventional BR configuration? If so, there is an RJ45 wireline port inside the unit that your TRC equipment interfaces to. TRC configuration is performed in the CSS for the GTR8000. It's a very simple configuration.
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”