Batboard

Have a number of HT1000 radios that I would like to put back into use.

Have 2 versions of software on the computer. Have R01.00 and R02.10.02 right now. My guess is the R02.10.02 would be the better choice. Any comments or suggestions?

Jim

Try the latest you have and see if the radios read successfully, if so you should be GTG. That older version will likely only work with 'A' revision radios. If you have 'D' rev. radios you need about R03. or better.

HT1000 & VISAR Conventional RVN-4098H RVN 03.03.08 April 1998 Yes, Pentium compatible, runs in DOS.

This was the last version RSS.