Batboard

Help Interface Motorola MTR3000 TO Raytheon NXU-2A ,

I'm using Motorola MTR3000 I want to Interface TO NXU-2A Network Extension Unit (ROIP).

The Problem in the MTR3000 J7 Auxiliary System Connector DB25 Pin it's not clear in the manual PTT , COR , etc....?

The Raytheon NXU-2A 15 Pins Out Connector DB15 .

I need to connect the 15 Pins in the Raytheon NXU-2A to MTR3000 J7 Auxiliary System Connector DB25 Pins
Please help

Step 1: Read some of the resources; best one I found so far (there may be others):

http://www.repeater-builder.com/motorol ... acing.html

and another one that seems to address the MRTI connector specifically:

http://www.repeater-builder.com/motorol ... cable.html

My quick scan on these pages tell me that it should be pretty easy. YMMV.

All hail batlabs & repeater-builder.

The both links for MTR2000 not MTR3000

Hi, did you make it work? I need to do the same interface, please let me know...

regards

BR

The both links for MTR2000 not MTR3000

I just verified connector pinouts between what's on R-B and an MTR3000 manual. Same thing.

As it says on the R-B page for Motorola.