Page 1 of 1
PM400 BOOTSTRAP Mode
Posted: Sat Nov 08, 2014 9:56 pm
by BigTex1136
How do you put this radio in bootstrap mode
Re: PM400 BOOTSTRAP Mode
Posted: Sun Nov 09, 2014 7:56 am
by Al
The CM200, CM300, PM400 all contain the same hardware. The PM400 powers up in bootstrap mode when the programming cable with flash adapter is attached and the radio is powered up with the flash adapter's switch is set to the 'flash' position(GTF374B cable and FKN8096 flash adapter).
Re: PM400 BOOTSTRAP Mode
Posted: Sun Nov 09, 2014 8:03 am
by SteveC0625
BigTex1136 wrote:How do you put this radio in bootstrap mode
Mic connector - jumper pins 1 & 3. Also is necessary to place the radio in programming mode.
Details are in the Basic Service Manual which I am making available here for download:
https://drive.google.com/file/d/0BxAVX2 ... sp=sharing
In the PDF, go to page 54. (Manual page is 6-6.)
Re: PM400 BOOTSTRAP Mode
Posted: Sun Nov 09, 2014 10:37 am
by BigTex1136
That's what I needed. Thanks guys.