The Canopy / Cambium PTP (point to point) microwave features dual polarized signal paths - vertical and horizontal. Typically you use a dual polarized dish, though you can use two individual antennas. Your link is having problems, and the diagnostics screen shows 100% vertical signal, and no horizontal at both the near and far ends. You swap the RF cables at the near end so that the Canopy V port goes to the dish H, and the Canopy H port goes to the dish V port. The near end diagnostics remain the same - 100% vertical, and no horizontal. The far end diagnostics have inverted - now it's 100% horizontal, and no vertical.
Which end is broken?
Picture goodness to add emphasis why you need the correct answer.