I am trying to convert a HMN9052C handheld Microphone to an 8 pin kenwood and can not find the pin outs for the mic on the internet.
Can someone point me in the right direction for the pin out.
Thank you
Shane
HMN9052C Microphone pin out
Moderator: Queue Moderator
-
- New User
- Posts: 7
- Joined: Tue Jul 15, 2014 11:27 am
Re: HMN9052C Microphone pin out
Ask and ye shall receive: http://www.batlabs.com/images/1550svc.gif
-
- New User
- Posts: 7
- Joined: Tue Jul 15, 2014 11:27 am
Re: HMN9052C Microphone pin out
That would be it, but I have another question.
Does anyone know what colors go to what pin? Someone (me) cut the end off and now I can't find it to mate the colors to the pin.
Thank you
Shane
Does anyone know what colors go to what pin? Someone (me) cut the end off and now I can't find it to mate the colors to the pin.
Thank you
Shane
Re: HMN9052C Microphone pin out
Easy peasy. Get a multimeter and ohm them out.
Re: HMN9052C Microphone pin out
Motorola uses carbon equivalent and Kenwood uses dynamic (or used to).
Re: HMN9052C Microphone pin out
Similar to my interface for a Motorola GM300 mic on a ICOM-7200 HF radio... two resistors.