Page 1 of 1
Spectra Tac
Posted: Tue Oct 06, 2015 11:54 am
by sean7969
Was wondering if anyone has used two comparators for a single voting system and how to wire. I have a customer with 7 sites and need to add another but it is full. First one is wired for Voted simulcast connected to Digitac panel.
Re: Spectra Tac
Posted: Tue Oct 06, 2015 4:19 pm
by Karl NVW
Instructions for adding a second 8-port chassis are in the basic DigiTAC manual. Beyond two gets rather complicated unless you have the full set of manuals and know what you are doing.
Re: Spectra Tac
Posted: Wed Oct 07, 2015 7:40 pm
by d119
Well the DIGITAC should hold 8 receivers in it's master chassis without an additional chassis, so I'm not quite understanding the problem here.
Re: Spectra Tac
Posted: Sat Oct 10, 2015 8:12 am
by jackhackett
I'm a bit confused, the post is labeled "Spectra Tac", but then DigiTac is being mentioned, could the original poster give a better description of what their current setup is?
Re: Spectra Tac
Posted: Mon Sep 12, 2016 6:58 am
by sean7969
Digitac patch panel. Just passes the audio. Comparator is Spectra Tac.