MCS2000 Model 3 Conversion Codeplug
Posted: Sun Mar 27, 2016 9:22 pm
Hi All, not sure if there's a better spot to post this.
I've got an MCS2000 Model 2 VHF, and an MCS2000 model 3 800. I'd like to do the ol' switcheroo and come out with a Model 3 VHF and Model 2 800. These are both dash-mount radios.
I've been told the easiest way to do the conversion is to find codeplugs for the radio you want to "make" and shove it in. This means I need to find a codeplug for the VHF 25W MCS2000 Model 3, which seems to be one of the rarest MCS's around. If anybody's got one, I would hugely appreciate it if you could read the codeplug and dump it somewhere for me. I've been hunting for a week now trying to find a codeplug and I've reached the end of my leads.
The specific model number of MCS I need is going to be M01KHN9PW5AN. Again if anybody's got one or knows someone who does, I'll be jumping for joy.
Unless there's another way to do this that is easier of course. Anybody sucessfully swapped control heads on the MCS series?
I've got an MCS2000 Model 2 VHF, and an MCS2000 model 3 800. I'd like to do the ol' switcheroo and come out with a Model 3 VHF and Model 2 800. These are both dash-mount radios.
I've been told the easiest way to do the conversion is to find codeplugs for the radio you want to "make" and shove it in. This means I need to find a codeplug for the VHF 25W MCS2000 Model 3, which seems to be one of the rarest MCS's around. If anybody's got one, I would hugely appreciate it if you could read the codeplug and dump it somewhere for me. I've been hunting for a week now trying to find a codeplug and I've reached the end of my leads.
The specific model number of MCS I need is going to be M01KHN9PW5AN. Again if anybody's got one or knows someone who does, I'll be jumping for joy.
Unless there's another way to do this that is easier of course. Anybody sucessfully swapped control heads on the MCS series?