Page 1 of 1
DMR emission code
Posted: Mon Oct 17, 2016 10:58 am
by OldDawg
Mods, if this isn't in the right form, apologies.
Does anyone know what the proper FCC emission code should be for narrowband 2 slot DMR operation, and for narrowband, single slot dmr operation?
- Sarge
Re: DMR emission code
Posted: Mon Oct 17, 2016 4:02 pm
by KitN1MCC
Re: DMR emission code
Posted: Tue Oct 18, 2016 8:42 am
by OldDawg
so what would NB simplex DMR voice be.......12K50FXE?
Re: DMR emission code
Posted: Wed Oct 19, 2016 7:46 am
by fineshot1
OldDawg wrote:Mods, if this isn't in the right form, apologies.
Does anyone know what the proper FCC emission code should be for narrowband 2 slot DMR operation, and for narrowband, single slot dmr operation?
- Sarge
That would depend on whether the DMR system in question is transmitting voice or data
Re: DMR emission code
Posted: Wed Oct 19, 2016 7:56 am
by OldDawg
I would make note of either code for reference
Re: DMR emission code
Posted: Wed Oct 19, 2016 9:18 am
by fineshot1
OK - this should answer your question either way
7K60FXD 2-slot DMR TDMA data
7K60FXE 2-slot DMR TDMA voice
Re: DMR emission code
Posted: Wed Oct 19, 2016 9:24 am
by OldDawg
ya I got that from the chart.....I was wondering if the codes were the same for simplex dmr channels...
Re: DMR emission code
Posted: Wed Nov 02, 2016 11:26 am
by gatekeep
There is no such emission code as 12K50FXE for DMR. The 7K60FXD and 7K60FXE are used for both repeated and simplex communications.
FWIW: 12K50 isn't even a correct prefix for 12.5khz channels; 11K2 is the 12.5khz channel prefix.