Page 1 of 1
XTS2500 900mhz ham band
Posted: Tue Apr 11, 2017 3:27 pm
by KitN1MCC
I am trying to find full info on how to hex edit the CPS for 900.mhz but seem to find only bits and pieces. i have hex edited xpr but never the XPS and not sure were to start
Re: XTS2500 900mhz ham band
Posted: Wed Apr 12, 2017 5:25 pm
by d119
It's pretty straight forward, if you follow the directions here on the site for modifying it for the UHF radios, just change the values for the 900 stuff.
Re: XTS2500 900mhz ham band
Posted: Thu Apr 13, 2017 7:59 pm
by Number 6
What version of CPS are you using?
Re: XTS2500 900mhz ham band
Posted: Thu Apr 20, 2017 5:28 pm
by KitN1MCC
r15.00.00
Re: XTS2500 900mhz ham band
Posted: Sat Apr 22, 2017 9:55 am
by Number 6
Use the replace command to look for the following hex strings, and then replace them with the provided strings. Make sure you are searching for hex values.
RX Lower Limit / TX TA Lower Limit
Factory: 935.0125 = 9428BB37
Change to
Ham: 926.0000 = 80A33137
Replace command should report changes in twelve places
TX RPT Upper Limit
Factory: 901.9875 = AC3CC335
Change to
Ham: 903.0000 = C0AFD235
Replace command should report changes in one place
Re: XTS2500 900mhz ham band
Posted: Sun Apr 23, 2017 3:38 pm
by KitN1MCC
i figured it all out got it working