Batboard

My friends just traded his 97 f305 for a f550. .

any tips or tricks for rhtei truck

also is there a power point on the that is switch from Battery.
he is having the local place put the plow on and they always like to tap the better Box i hate to do that is there a pic off on them

Don't understand what you are asking?...."also is there a power point on the that is switch from Battery"???? Are you looking for an ignition switch, are you looking for a hotwire for power????

ignittion swicjed power

Boy...it must have been a good Saturday night!

The best thing to do would be to wire your radio's power wire to the battery and tag the ignition sense option to a ignition switched fuse in the fuse block. If you don't want to convert your radio to ignition switched, just use a relay, wire your turn on for the relay to the ignition switch. What kind of radio are you installing? Maybe I could give you a better suggestion.

Yes it i was. And i dont Even Drink just dont sleep as much as i need to.

Well it is Not for the Radio. It is for the Plow controller.

seeing how most Plow installing places always hack the fuse blocks

Sleep? What is this "Sleep" you speak of?

Sorry about previous post, I thought you were talking about for the radio. Also, sorry I can not help you with the snow plow. I don't even know what a snow plow is being that I'm from southeast Texas, we never see snow.

Snowplow on F550......

Connect your pump's #4 power cable directly to the battery side of the starter solonoid on the inner fender on a Ford.

For the control's power, you may use this same point, but use a 30A fuse inline. You can also get B+ power at the underhood fuseblock where the large cable from the battery attaches to it.

snow is a fun things and snow plows are even more fun.

i think i migh use the fuse block if there is an open point