Hi all,
I want to use a MC2100 UHF radio as a transmitter for a digital voice ham radio MMDVM based repeater. It's not the first repeater I'm making but there's a thing. While on other Jedi radios like the GM900, or even the GM1200 that i've flashed the MC2100 from, pin 24 - AUX TX IN2 works great as an input for the external modulation signal. It's wideband, no pre-emphasis etc. Problem is that for all the other radios save from the MC2100, I could find somewhere in the RSS how to enable this input. So my repeater obviously doesn't work.
Does anyone know how to enable the 24 AUX TX IN2 external modulation input for the MC2100? Or where to input the signal so it actually modulates the carrier? That is apart from the MIC IN or EXTERNAL MIC IN inputs, where the signal modulates the carrier, but even though the inputs are not pre-emphasized, they lack the necessary bandwidth for the modulation signal.
And the most annoying thing is that in tune mode the signal gets through. So, apart from putting the radio in tune mode or flashing it back to GM1200, what else is there to do?
Dan
YO2LLQ
- Board index General General Motorola Solutions & Legacy Radio Discussion
- Search
-
- It is currently Thu May 16, 2024 10:06 am
- All times are UTC-08:00
MC2100 external modulation input
The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!
Moderator: Queue Moderator
Return to “General Motorola Solutions & Legacy Radio Discussion”
Jump to
- Administrative
- ↳ Announcements and Forum News
- ↳ Forum Rules
- General
- ↳ General Motorola Solutions & Legacy Radio Discussion
- ↳ Radio Programming
- ↳ Software & Firmware Releases & Issues
- ↳ Codeplug Information
- ↳ NFPA 1802 Discussion
- Current Motorola Solutions Public Safety / Astro Product Line
- ↳ APX NEXT
- ↳ APX Series Subscribers
- ↳ ASTRO Series (Astro Saber, Spectra, XTS3000/3500) Subscribers
- ↳ ASTRO25 Series (XTS/XTL 1500/2500/5000) Subscribers
- ↳ ASTRO Experimental - How to do things a little out of the box
- ↳ ASTRO Products Feature Requests & Future Speculation
- ↳ Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum
- Current Motorola Solutions Professional / Business Product Lines
- ↳ MotoTRBO ION Devices
- ↳ Motorola CP/CM Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers
- ↳ MotoTRBO Repeaters, Trunking, and Site Infrastructure
- ↳ MotoTRBO 3rd Party Application Discussion & Support
- ↳ MotoTRBO/Business Products Feature Requests & Future Speculation
- ↳ Experimental - How to do things a little out of the box
- Motorola System Infrastructure (Consoles, Base Stations, Repeaters, Trunking, etc.)
- ↳ Smartnet/Smartzone/Project 25 (Phase I/II) Systems
- ↳ Base Stations, Repeaters, General Infrastructure
- ↳ Consoles
- ↳ Experimental - Mods, and how to do things a little out of the box
- ↳ Infrastructure Product Feature Requests & Future Speculation
- Focused Discussion
- ↳ Motorola Digital and Voice Paging
- ↳ Converting Motorola Equipment to 900MHz Amateur
- ↳ Test Equipment & RF Equipment Alignment
- ↳ Vehicle Radio Installs
- ↳ Experimental and Next Generation LMR
- ↳ Motorola Digital Radio Compatability
- Off-Topic Discussion
- ↳ Vehicle Warning Equipment Discussion
- ↳ Computer/Technical Assistance
- ↳ Knowledge Base