BER test failure
Moderator: Queue Moderator
- Jayce
- Posts: 51
- Joined: Sun Jan 13, 2002 4:00 pm
- What radios do you own?: XTS/XTL & APX6000 & APX/XE
BER test failure
Recently received a batch of APX6000XE in October. Started running then thru the auto-test on a Aeroflex 3920 and they passed without a hitch. After programming several and running them thru auto-test, they all failed the BER test. The machine just would not run the tests, timed out trying. After much trial and error, I found that enabling the audio playback(Radio Wide/Features) caused the problem Opened a case with Motorola and after sending them my codeplug, they determined it was the firmware R20.33. Suggested upgrading to R20.35, did not correct the problem. Motorola says they will correct the problem this December, but I'm still waiting. Meanwhile I have a lot of $$$ gathering dust in my office.
Re: BER test failure
I don't really see why they are gathering dust if they pass the test with the option unchecked? Unless the feature itself isn't working properly in the field when checked?
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.
Welcome to the /\/\achine.
Welcome to the /\/\achine.
- Jayce
- Posts: 51
- Joined: Sun Jan 13, 2002 4:00 pm
- What radios do you own?: XTS/XTL & APX6000 & APX/XE
Re: BER test failure
My guys like and use that feature. And with the mess that is CPS R20, along with this problem in the firmware, I am being cautious about sending someone into a burning building with a flaky radio. So far everything labelled R20 has been horrible. Someone should be fired over this release.
- Jayce
- Posts: 51
- Joined: Sun Jan 13, 2002 4:00 pm
- What radios do you own?: XTS/XTL & APX6000 & APX/XE
Re: BER test failure
Firmware upgrade R20.61 fixed the problem.