After searching the internet for a Astro Tac 3000 manual I was only able to find the software manual.
In attempting to connect 2 Astro Tac 3000 comparators in the expanded mode there seems to be an issue with the secondary unit and the v.25 connections. The DIU on the Master shelf’s connectivity seems to be OK
With no connection the wireline cards do not flash that there is an error, they are setup as station internal.
When veining the status screen in the RSS with no cables plugged in the port shows Idle and HDLC address is 3F
It is believed that the thin net connection between the shelves is working as when programing the ports and the reset is requested thru the RSS both shelves reset
Here are the steps that where followed.
1) Verify proper operation of both Astro Tac 3000 comparators in “Standard” mode (conventional)
2) Connect 10 MHz reference
3) Set ip addresses to be sequential
4) Connect the thin net connection utilizing a “t” connector and terminators.
5) With the programing cable on the main Set the main (DIU) shelf to Primary (save and reset)
6) With the programing cable on the secondary 1Set the secondary shelf to Secondary 1 (save and reset)
7) Move the programming cable back to main and enable the V.24 ports on the secondary 1 (save and reset)
Please tell me what I have done wrong or left out
Thank you in advance for your help.
- Board index Motorola System Infrastructure (Consoles, Base Stations, Repeaters, Trunking, etc.) Base Stations, Repeaters, General Infrastructure
- Search
-
- It is currently Tue May 21, 2024 4:46 am
- All times are UTC-08:00
Astro-Tac 3000 expanded mode issues
This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.
Moderator: Queue Moderator
Return to “Base Stations, Repeaters, General Infrastructure”
Jump to
- Administrative
- ↳ Announcements and Forum News
- ↳ Forum Rules
- General
- ↳ General Motorola Solutions & Legacy Radio Discussion
- ↳ Radio Programming
- ↳ Software & Firmware Releases & Issues
- ↳ Codeplug Information
- ↳ NFPA 1802 Discussion
- Current Motorola Solutions Public Safety / Astro Product Line
- ↳ APX NEXT
- ↳ APX Series Subscribers
- ↳ ASTRO Series (Astro Saber, Spectra, XTS3000/3500) Subscribers
- ↳ ASTRO25 Series (XTS/XTL 1500/2500/5000) Subscribers
- ↳ ASTRO Experimental - How to do things a little out of the box
- ↳ ASTRO Products Feature Requests & Future Speculation
- ↳ Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum
- Current Motorola Solutions Professional / Business Product Lines
- ↳ MotoTRBO ION Devices
- ↳ Motorola CP/CM Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers
- ↳ MotoTRBO Repeaters, Trunking, and Site Infrastructure
- ↳ MotoTRBO 3rd Party Application Discussion & Support
- ↳ MotoTRBO/Business Products Feature Requests & Future Speculation
- ↳ Experimental - How to do things a little out of the box
- Motorola System Infrastructure (Consoles, Base Stations, Repeaters, Trunking, etc.)
- ↳ Smartnet/Smartzone/Project 25 (Phase I/II) Systems
- ↳ Base Stations, Repeaters, General Infrastructure
- ↳ Consoles
- ↳ Experimental - Mods, and how to do things a little out of the box
- ↳ Infrastructure Product Feature Requests & Future Speculation
- Focused Discussion
- ↳ Motorola Digital and Voice Paging
- ↳ Converting Motorola Equipment to 900MHz Amateur
- ↳ Test Equipment & RF Equipment Alignment
- ↳ Vehicle Radio Installs
- ↳ Experimental and Next Generation LMR
- ↳ Motorola Digital Radio Compatability
- Off-Topic Discussion
- ↳ Vehicle Warning Equipment Discussion
- ↳ Computer/Technical Assistance
- ↳ Knowledge Base