So I posed this question on the RR site and all I seem to get are "read the manual" type responses. Please do not respond with that here. Assume I have read the manual and I have exhausted that option. What that tells me is they like to respond, but don't actually know the answer.
I am trying to set up a bi-directional RICK with a VHF CDM1250 and a lowband maxtrac. I have been setting up RICK units (of similiar type radios) for years so I understand them just fine. What I have never done is combine a maxtrac and a CDM (waris) unit. Can someone give me a clear answer on the pin assignments? i.e. maxtrac lowband pins set to..... CDM1250 pins set to......
Thanks in advance
CDM1250 and maxtrac bi-directional RICK
Moderator: Queue Moderator
CDM1250 and maxtrac bi-directional RICK
I may not fire the first shot, but I will fire the last one.
Re: CDM1250 and maxtrac bi-directional RICK
Disregard,
I solved it. I need to have the pin-8 set properly and also pin-3 on the CDM. The maxtrac was correct
I solved it. I need to have the pin-8 set properly and also pin-3 on the CDM. The maxtrac was correct
I may not fire the first shot, but I will fire the last one.