Building phase 2 contact list in APX
Posted: Wed Mar 22, 2023 4:41 am
Good morning,
My first attempt at building a phase 2 trunking call list, or alias list if you will, in an APX radio.
Want to be able to display the talking radio's alias, instead of the trunking SUID.
I have contacts in the UCL. When I open up the ID to set the Type 2 trunking id, it shows the system name in red. Assuming the unit ID field is hex, because it only allows 5 characters instead of 7.....but it won't take the hex it. it returns to unassigned.
Any help would be appreciated. Thanks a lot.
My first attempt at building a phase 2 trunking call list, or alias list if you will, in an APX radio.
Want to be able to display the talking radio's alias, instead of the trunking SUID.
I have contacts in the UCL. When I open up the ID to set the Type 2 trunking id, it shows the system name in red. Assuming the unit ID field is hex, because it only allows 5 characters instead of 7.....but it won't take the hex it. it returns to unassigned.
Any help would be appreciated. Thanks a lot.