Page 1 of 1
Posted: Tue Nov 27, 2001 5:44 am
by Tom in D.C.
I just found this eBay listing which includes the correct size spanner-head bit for the Saber battery plate captive screws.
http://cgi.ebay.com/aw-cgi/eBayISAPI.dl ... 1302892111
In the picture the Saber bit is the one on the upper left.
Tom, W2NJS
...in D.C.
<font size=-1>[ This Message was edited by: Tom in D.C. on 2001-11-27 08:45 ]</font>
Posted: Tue Nov 27, 2001 6:09 am
by Nick
Good eye's Tom!
I bought one of those sets a while back, there great! Also handy for the Spectra/Astro Spectra etc...
Have a nice day!
Nick
<font size=-1>[ This Message was edited by: Nick on 2001-11-27 09:14 ]</font>
Posted: Wed Nov 28, 2001 3:30 pm
by RadioSouth
Other method is start with a blade screwdriver with the correct witdth and it takes 2 min. with a dremel metal cutting disc
to make the notch.
Posted: Wed Nov 28, 2001 3:49 pm
by ScannerDan
Go to the radio shack web site and look under there commercial sales catalog and you'll find the same thing for about $ 7.00. I bought one and it works great on my sabers.
Dan....
Posted: Wed Nov 28, 2001 8:14 pm
by ScannerDan
OK, I looked in the new Radio Shack 2001 Commercial catalog on page 218, and it lists the 33 piece security bit set, Cat# 910-5247 at 12.99 ea. I bought mine on sale. But 12.99 isn't a bad deal. Check out
http://www.radioshack.com for further.
Dan...
Posted: Wed Nov 28, 2001 8:33 pm
by Astro_Saber
Posted: Wed Nov 28, 2001 8:42 pm
by Astro_Saber
shipped it was like under 12.00