Page 1 of 1
Posted: Tue Nov 27, 2001 8:37 pm
by sethg
Converting a dash mount to a remote mount. I got the remote head kit without the cable. I took the current head off and tried to line up the pins on the "adapter" plate. They didn't want to line up. Maybe the board was in upside down...anyhelp would be great....also looking for the cable to go between...
Posted: Tue Nov 27, 2001 8:53 pm
by Nick
There's a difference between the Spectra and Astro Spectra "adapter" plates, have you got the right one??
Nick
Posted: Tue Nov 27, 2001 8:55 pm
by sethg
I do have to regular spectra plate....I think..
Posted: Wed Nov 28, 2001 5:16 am
by Bugs Bunny
Stupid question but did you remove the interconnect board between the control head and the main chassis when you removed the head from the radio. The part number is I believe HLN6000B. Once this is removed the new faceplate can be installed.
Bugs
Posted: Wed Nov 28, 2001 8:17 pm
by apco25
Ordered a spectra A7 remote control head back housing new from motorola a few months ago. The control head wouldn't mate with the connector, couldn't figure out why until I realized they assembled it backwards!