Page 1 of 1
Posted: Wed Nov 28, 2001 2:57 pm
by COSMOS
Hi all, want to convert an MTX838 with top display only (H01SDD9DB4AN) to full keypad with LCD. ANy body know an easy way to do this?? I have the new front, but cannot justify the Aus$250 the local shop wants to fit it and make it work!
Any help much apppreciated!
Thanks
<font size=-1>[ This Message was edited by: COSMOS on 2001-11-28 17:59 ]</font>
Posted: Wed Nov 28, 2001 3:37 pm
by HAM-AAF
You can use MTX lab rss to read a radio which has full keypad with LCD. then you can program to your radio. JUST is it.
But you will change your radio's model number and S/N.
Posted: Wed Nov 28, 2001 3:52 pm
by COSMOS
Thanks, I will give that a go tonight!!
Posted: Wed Nov 28, 2001 6:59 pm
by HAM-AAF
There is not all MTX838 radios can be easliy change to B7 model (with full keypad and LCD) by program by LAB RSS,some radio need change the logic board or rewrite EEPROM(28C256) .
So you must save the codeplug date by lab RSS. If you can¡¯t update your radio you will need it.
Posted: Wed Nov 28, 2001 9:28 pm
by COSMOS
Thought I Had access to a UHF radio, but unfortunatley it low band VHF!
WHat are the odds of turning my radio into a paper weight if i try this ??