Batboard

i got a T3020BX key loader but it is locked,
the person that i got it from does not have the code to unlock it .

when it is powered up all it displays is

LOC.
no other keys work (load,seq,clr,etc) but when the numbers are pressed i get

LC. (with a space for 6 digits)

and whatever number or letter that was pressed .

any information on who to contact or a passcode would be helpfull.

thanks , willliam

You don´t need a password or anything like that. You can unlock the unit by pressing the certain sequence at startup. Let me check my manual and get back to you.

Ciphernet

Hi:

Book says its pretty simple if all
is in working order.

1st, depress ( CLR ) and while the CLR
button is deperessed, Push ( ON ), this
will erase any Propriatory KVL code Plugs,
Secret Memory, and restores the KVL to a
default mode.

Should work OK after that

Monty