Page 1 of 1
Posted: Wed Dec 26, 2001 5:27 pm
by n7ryy
I aquired a Motorola RIB that had been modified to use as a flash RIB. It doesn't work as a programming rib currently. I was wondering if someone could send me a picture of an unmodified rib(front and back sides) so I can compare it with what I have and unmodify it. I can tell some jumpers have been added, but am also wondering if any components were added as well. If needed I can send pics of my rib.
Thanks
Jeremy
[email protected]
Posted: Wed Dec 26, 2001 9:28 pm
by Monty
Hi:
I hate to say it, but you may have a hacked
Rib Box, and I would use caution using it untill its suitablity can be determined.
Failure to do so may kill a high end radio
The Smart Rib ( Flash ) Rib is a very complex Rib Box, and the use of "Anything"
else could destroy a High End Radio.
This is a photo of a SRIB_pc....Its full of SMC Componets and LSI chips and is nothing
like the RLN4008B or E.
<img src="
http://www2.4dcomm.com/metrotech/srib_pc.jpg">
And here a general photo of the Normal Motorola Rib Box
http://www2.4dcomm.com/metrotech/rib_pc.jpg
<font size=-1>[ This Message was edited by:
[email protected] on 2001-12-27 00:29 ]</font>
<font size=-1>[ This Message was edited by:
[email protected] on 2001-12-27 00:30 ]</font>
