Page 1 of 1
Posted: Thu Dec 27, 2001 5:46 pm
by Tron
Does anyone have the speaker pinouts for the above rear mount mobile radio that are in the "D" type accessory plug that is on the bottom of the radio? Thanks in advance
Tron
Posted: Fri Dec 28, 2001 3:59 am
by Doug
Tron
The pinouts are available at the "batlabs" site. Here is the URL address look under accessory connector.
http://www.batlabs.com/gm900.html
The pinouts are the same between the GM900 and the MCS2000
Doug
Posted: Fri Dec 28, 2001 5:57 am
by wavetar
It's amazing what can be "found" on the regular BatLabs site if one takes a few minutes & looks. I know most of you, like myself, probably have this forum book-marked and come straight here, and seldom go to the actual site. But, let it be known, there's a wealth of information there to handle most basic questions on most models. Don't get me wrong, any question is welcome on the board, but much time can be saved by looking first, and asking later.
Todd
Posted: Fri Dec 28, 2001 7:12 pm
by Tron
Thanks to all for the quick reply. I needed the info in a hurry for a job. I would have called Mot if they were open in tech support. However, I have found it quicker to ask first, get pointed in the right direction and go from there rather than plowing thru alot of dead ends, etc..
Tron