Page 1 of 1
Posted: Sat Dec 29, 2001 7:37 pm
by DijitalLee
I am in need of an A9 control head for a Spectra radio. The one I have is part number HCN1073A. I have been offered one the is part number HCN1093D. Does anyone know what, if any, the difference is in these two control heads? Anyone have any pics? The one I have looks like this one:
<img src="
http://66.134.33.220/A9.jpg">
Thanks.
Posted: Sat Dec 29, 2001 9:25 pm
by DijitalLee
Mistake on the above part numbers:
I have a HCN1073A and need to know what a HCN1073D is. I accidently put 1093, sorry. Hope someone can help me out....
Posted: Sat Dec 29, 2001 9:26 pm
by jmr061
Yes a 1073D head will work with your spectra. There are numerous heads that will.
They all look pretty much the same except for ones with 3 rocker buttons on the bottom which are used for zone enabled radios and sometimes trunking.
Jason
<font size=-1>[ This Message was edited by: JMR964 on 2001-12-30 00:28 ]</font>
Posted: Sat Dec 29, 2001 9:46 pm
by alex
Check out
http://www.batlabs.com/spectra.html to find out what model heads will work on the Spectra, and what their purposes are based... (rear head, etc...)
-Alex
Posted: Sat Dec 29, 2001 9:51 pm
by DijitalLee
Thanks. I overlooked the info I needed on the Batlabs Spectra page. The answer was already there. Thanks to those that helped.
