Page 1 of 1
Spectra speaker plug
Posted: Mon Jun 16, 2003 3:54 am
by John
Does anyone know a source for the connector used on Spectra speakers? I am looking for both the mating connector to plug into a Spectra external speaker and the actual speaker plug itself. This is the same connector used on the Spectra ignition sense leads. I need about 6 of each.
Thanks,
John
speaker plugs
Posted: Mon Jun 16, 2003 6:22 am
by jackhackett
if you mean the white 2 pin connector, you can get them from Mouser (
http://www.mouser.com)
male shell: 571-14803190
female shell: 571-14803180
male pin: 571-606181
female pin: 571-606171
Posted: Mon Jun 16, 2003 6:26 am
by fail999
As I recall these are off the shelf Molex parts.
Radio Side: Body 1-480319-0
Pin 60620-1
Spk Side: Body 1-480318-0
Pin 60619-1
actually
Posted: Mon Jun 16, 2003 7:27 am
by jackhackett
Tyco/Amp mate-n-lok
I suppose molex may make them too, but I don't see any molex part numbers that look similar.
Anyway, the source I mentioned is good.. no minimum order, good service.
Posted: Mon Jun 16, 2003 12:50 pm
by John
Thanks for the replies..... I have them on order through Mouser.
John