Page 1 of 1
Posted: Thu Jan 03, 2002 9:11 am
by smiller
Does anyone know what the difference is between the 'A' and 'B' version of the UHF MT1000? (i.e. H44GCU7100<B>A</B>N vs. H44GCU7100<B>B</B>N).
Thanks in advance...
Posted: Thu Jan 03, 2002 8:08 pm
by 10-95
Not real sure, i have not played with one in a while but I beleive the AN is non DTMF and the BN model may be DTMF.
Or it could apply to scan functions.
10-95
Posted: Fri Jan 04, 2002 3:35 am
by Keygun
If i rember correct, "B"-models have Scan, "A"-models have none.
Keygun
Posted: Fri Jan 04, 2002 8:04 am
by smiller
Yes, I believe that you are correct... in fact, in the RSS software there is a notice on the scan programming page that only 'B' models are supported. Thanks for the tip!
Posted: Sat Jan 05, 2002 7:24 pm
by PCSAR4x4652
the big difference is that an A model will not work the ENHANCED FEATURES of an enhanced contvertacom and the B model will. A model will work in it it but you won't get the ch display or other features, you have to use the radio's functions controls.
_________________
Todd Freeman
Pierce Co Sheriff Dept. SAR
<font size=-1>[ This Message was edited by: PCSAR4x4652 on 2002-01-05 22:27 ]</font>
Posted: Mon Jan 07, 2002 12:51 pm
by phrawg
a,b,c,&d are simply the revisions of the radio's firmware. The reason that a b scans and an a doesnt is that // didnt want to give away the farm on the first run..
There is no corelation between a=non scan
b=scan etc, it is just when they decided to add the feature. ht1000;s and visars
have as high as d's. In other words a letter does not always mean a certain option
it simply means a change has been done. sometimes simply an improvement with no "new features" Phrawg