Page 1 of 1
Posted: Tue Jan 15, 2002 2:28 pm
by narc29
Well, I found a couple HT600's VHF and they were marked XTALS removed, I figured it was a mistake since they are RSS programmed. Come to find out after the RX was crap someone opened the radio and cut out a three prong crystal inside of the radio. I need the part number in order to obtain replacements. Also if you know the placement of it.
thanks
Jeff
Posted: Tue Jan 15, 2002 4:11 pm
by phrawg
that is one of the if bandpass filters.
Maybe they were bad so the tech removed them with the intent of replacement at a later time. That would explain the rx being crappy. Phrawg
Posted: Tue Jan 15, 2002 4:19 pm
by metro121
maybe the last guy that had them thought he had to change them to get differant channels put in them.
Posted: Tue Jan 15, 2002 4:22 pm
by Medic-10
Give me the model # of the radio. I have a number of HT 600,s that I am using for parts. Earl
Posted: Tue Jan 15, 2002 5:18 pm
by vcaruso
If memory serves me there was a similar thread on this board a few months ago.
I believe that rather than reprogramming the radios the govt techs had removed the xtals.
Search through the archives it was informative.
Vince
Posted: Tue Jan 15, 2002 5:51 pm
by narc29
Thats exaclty what happened, they were GOVT radios and the idiots cut outt he only crystal they could find. the model number is H33SVU7120BN, if anyone has the part number please email me,
[email protected]
Posted: Tue Jan 15, 2002 5:55 pm
by narc29
<font size=-1>[ This Message was edited by: narc29 on 2002-01-15 21:22 ]</font>
Posted: Tue Jan 15, 2002 8:08 pm
by Monty
Hi:
If you are not able to find
anyome to help,I too have a
good stock of old parts. Those
radios are as common as chickens....
MS
<font size=-1>[ This Message was edited by:
[email protected] on 2002-01-15 23:10 ]</font>