Help with Astro Spectra..........
Posted: Mon Oct 20, 2003 6:18 pm
Hello,
I have a question regarding the Astro Spectra radio. I just received one that is supposed to be 800mhz (no factory tags). I am trying to read it with RSS 9.5. When I press the key to read data from radio, there is about a 10 second pause, then the radio 'reboots' and the RSS tells me that communications with the radio failed. The only thing I noticed about this radio is that when I plug the programming cable in, the radio turns on immediately (as opposed to when I use the same cable with a regular spectra, I have to turn it on). During the power-up sequence, the display reads 'Spectra+'. My programming setup is as follows: NEC VersaV/75 laptop, RLN4008B, Factory Spectra (LP) cable and a Monty RIB to Computer cable. This setup works with any radio that I have tried to program. Performing a comm test produces a time out error. Is this radio screwed up, or am I?
Jerry
I have a question regarding the Astro Spectra radio. I just received one that is supposed to be 800mhz (no factory tags). I am trying to read it with RSS 9.5. When I press the key to read data from radio, there is about a 10 second pause, then the radio 'reboots' and the RSS tells me that communications with the radio failed. The only thing I noticed about this radio is that when I plug the programming cable in, the radio turns on immediately (as opposed to when I use the same cable with a regular spectra, I have to turn it on). During the power-up sequence, the display reads 'Spectra+'. My programming setup is as follows: NEC VersaV/75 laptop, RLN4008B, Factory Spectra (LP) cable and a Monty RIB to Computer cable. This setup works with any radio that I have tried to program. Performing a comm test produces a time out error. Is this radio screwed up, or am I?
Jerry