r1225 needs repairman!
Posted: Sat Nov 01, 2003 3:50 pm
Thanks for the info. I took it apart and saw one transistor and one driver?
Ayway I resoldered and then it stayed steady 18 watts no bouncing around.
Then I resoldered again and now 14 watts.
The original problem was the pa would go from 28watts which it was set at and then jump to 20watts the first 30 seconds or so then go to 5 watts, Someone mentioned to resolder transistors so I did.
Now doing 15 watts instead of 28, But stays there steady.
I would like to get the pa fixed. Is there someone out here that
repairs the R1225 VHF 45 Watt Repeater?
< I can ship it tp you and pay for repair.
Thanks for all the help.
Rich NJ
Ayway I resoldered and then it stayed steady 18 watts no bouncing around.
Then I resoldered again and now 14 watts.
The original problem was the pa would go from 28watts which it was set at and then jump to 20watts the first 30 seconds or so then go to 5 watts, Someone mentioned to resolder transistors so I did.
Now doing 15 watts instead of 28, But stays there steady.
I would like to get the pa fixed. Is there someone out here that
repairs the R1225 VHF 45 Watt Repeater?
< I can ship it tp you and pay for repair.
Thanks for all the help.
Rich NJ