Batboard

Posted: **Wed Jan 23, 2002 4:11 pm**

Well I keep getting that checksum error when I read the transmit side. I got my hands on another R100 and read that codeplug fine and tried writing it to the one with the bad codeplug. Still didn't work. Anybody have any other ideas. I was playing areound with the hex editor and couldn't figure anything out. After you read a codeplug where is it stored in the computer, anybody know? Please email at [email protected]

Thanks
Warren

Posted: **Wed Jan 23, 2002 6:22 pm**

Since the last version of software came out in 1994. I would think you need to program it in True DOS mode, with a 486 computer! And RIB box, & cables. Sounds like you have a bad codeplug! See the post below, called: RIB Problems. (If its a moto rib, its most likely ok) read the info on computers!

Posted: **Fri Jan 25, 2002 7:18 pm**

Radio Ed, !!!!! a later version than 1.9 Feb 1988???? I also have a Ham radio version that is 430 to 449.975, with a 2-88 date.
April

Posted: **Fri Jan 25, 2002 8:27 pm**

On 2002-01-25 22:18, April wrote:
Radio Ed, !!!!! a later version than 1.9 Feb 1988???? I also have a Ham radio version that is 430 to 449.975, with a 2-88 date.
April

Well I went buy Motorola AccessPoint homepage. for latest software, it lists 9/22/94..I don't think I said 1988?

Posted: **Wed Jan 30, 2002 1:34 am**

That is the date for the Radius Mobiles Kit "Collection" of software. If anyone accually has a later version, that might help some of the problems on the R100 programming.

Posted: **Wed Jan 30, 2002 9:34 am**

The new kit just repackages the old software. There is no "New" version..

Posted: **Thu Jan 31, 2002 8:53 pm**

Well i got a new codeplug for the radio but now I get a verify fail error. Any idea what this means? Any help with understanding the software would also be appreciated. Like what f and s,v,x,m and all that stuff means.

Thanks
Warren
KB2DEM

Posted: **Fri Feb 01, 2002 5:11 pm**

I have a small instruction file for the R100 SW and I will put it here for all to use.

I also have the RSS manual and will copy it for expenses. PM ref. the man.

Posted: **Fri Feb 01, 2002 5:17 pm**

@echo off
cls
echo.
echo R100 Repeater Programmer Ham Radio Ver 1.9a
echo.
echo This program does not recognize the cursor arrows.
echo Use the number keys across the top of the keyboard.
echo The Num Lock and Caps Lock keys may need be activated for
echo the program to work properly.
echo.
echo KEY Function
echo 2 Move down within Menu
echo 4 Scroll back
echo 6 Scroll forward
echo 8 Move up within Menu
echo L List prog. options to display or printer
echo F Select special function
echo ESC Return to Main Menu
echo Enter Select option next to cursor or terminate data entry
echo Ctrl-C Quits the program
echo.
pause
r100h.com