Page 1 of 1
O/T Help with GE powercall siren
Posted: Thu Jan 01, 2004 2:25 pm
by Jay G.
Hello all. I was given an OLD GE Power Call Siren which I was asked to install in one of my FD's engines. I need to know if this unit is capable of being wired to 2 speakers or MUST be wired to one.
Model # 4EA22B12
Please email me directly!
[email protected]
Thanks!
Posted: Thu Jan 01, 2004 5:05 pm
by jim
My second favorite siren of all time!
One single 58 watt speaker does the job.
Two will do nothing more. Use an efficient speaker, not a Dynamax or Galls.
Powercall
Posted: Sat Jan 03, 2004 7:23 pm
by Tech225
I installed 6 new Powercalls on the local trucks back in the eighties. They came with two 58 watt speakers, so I hooked them up that way. They worked very well. Just keep the speaker leads parallell.
Posted: Mon Jan 05, 2004 2:37 pm
by Jay G.
UPDATE!
Ok, so the unit was hooked up and worked well during testing, but smoke checked during it's maiden voyage. It burned up a resistor in the unit. I see why - there was one wire broken off inside the unit. Anyone have a schematic of these??I'd love to replace the damaged parts and get this thing going again!
Thanks!