Page 1 of 1
Posted: Sun Feb 03, 2002 3:18 pm
by fred flintstone
I converted my 45w 800 spectra from dash to remote mount. It powers up fine but the display flashes "no emerg" I assume i need to jumper something on my vip port, which pins???
Posted: Sun Feb 03, 2002 3:43 pm
by Will
When front mounted there needs to be a jumper on the DB connector off of the control head end of the control cable. The power and speaker connections are on this 15 pin connector also, not on the radio itself.
Posted: Sat Feb 23, 2002 5:09 pm
by anti-LTR
ground pin 2 (emergency pin) on the DB15.