Batboard

Hello all,
My question is in regards to swaping the uhf rf board out of an mts2000 with a vhf board. and then reprogramming it in lab. Is this possible or to much of a change?
Thanks in advance
Nick

<font size=-1>[ This Message was edited by: nickdap on 2002-02-04 08:34 ]</font>

<font size=-1>[ This Message was edited by: Nickdap on 2002-02-04 08:35 ]</font>

[quote]
On 2002-02-04 03:32, Nickdap wrote:
Hello all,
My question is in regards to swaping the uhf rf board out of an mts2000 with a vhf board. and then reprogramming it in lab. Is this possible or to much of a change?
Thanks in advance
Nick



Yes, it is possible. But you have to realign everything in the service menu in order to have full specs.

Keygun

Watch out for the toolproofing issue!

thanks guys, i wouldnt really want to take on a prject this big right now, didnt think of having to align the radio, and yes the toolproofing too.
Thanks again