Batboard

Posted: **Thu Feb 19, 2004 10:21 pm**

Anyone know what the RSS is for the Scrambling boards in a GP350???

Thanks,
Matt

Posted: **Thu Feb 19, 2004 10:39 pm**

be more specific, what boards do you have installed? There are different scramblers that are for the 350

Posted: **Fri Feb 20, 2004 2:05 pm**

Hmmm..I didn't know there are different modules.

I had posted some questions about AVS boards for GP350's a while back but never got a reply. I tried installing one of the boards into one of my radios but it wouldn't turn on. Does the radio need to have a keypad or anything else to use the AVS? I tried it in both keypad and non versions and nothing happened. I don't have the AVS RSS tho.

Also, is there a seal or gasket that goes between the AVS board and the rear of the front cover? Mine didn't come with one and it seemed a bit loose.

Posted: **Fri Feb 20, 2004 2:06 pm**

Whoops, forgot to mention that I have the HLN9208A version.

Posted: **Mon Feb 23, 2004 9:44 pm**

Anyone??

Posted: **Thu Mar 11, 2004 9:30 pm**

GP350 AVS Version R01.00.00 5-17-96
Motorola Part # HVN6051A

This RSS programs the scambler board parameters ONLY and not the radio freq/tone/etc.

Best,
Mike

Posted: **Thu Mar 11, 2004 10:41 pm**

The AVS Advantage boards you refer to were manufactured by Transcrypt Interantional. I believe they are equivelent to thier current 416/430 series. http://www.transcrypt.com/

They were shipped with a rubber gasket between board & radio.

The board is often turned on/off with the squelch check/side button in the PTT bar.

Hope that helps.

mike

Batboard

GP350 Voice Scrambling

GP350 Voice Scrambling

HVN6051A GP350 AVS RSS

Additional Info