Page 1 of 1
MSF5000 repeater and DES-XL
Posted: Fri Feb 20, 2004 10:45 am
by n1pj
I was reading that you can keyload DES-XL into a MSF5000 repeater and it will only pass transmissions that match the key. Do you have the ability to keyload any MSF5000 repeater or do you need a special verson of the MSF5000 repeater for encryption. Will any MSF5000 do transparent mode so you can pass both encryption and open transmissions. Is it possible to put a PL on the repeater. Thanks
PJ
Posted: Fri Feb 20, 2004 2:42 pm
by apco25
If you want it to do proper code dected then you'll need the appropriate encryption hardware installed in the radio.
I think to function as a pass repeater is just a matter of programming if its a CXB digital station.
Yes you can program PL on the output.
Posted: Fri Feb 20, 2004 4:17 pm
by xmo
If you want the station to have secure capability, it must have the optional secure board.
If you want to be able to keyload the station for encryption / decryption to and from the wireline as well as proper code detect as a repeater qualifier, the station must also be equipped with encryption hybrids which plug into the secure board.