Page 1 of 1
What is this Maxtrac? (it's a M10, now I need a codeplug)
Posted: Tue Feb 24, 2004 10:14 am
by w7com
Model: M34xvc20f3aa
RF board: HLE8300A
Contoler: HLN 8074C
Date: 9528MAL
It's a 16 pin board without an EPROM. Beeps when I turn it on. Maxlab will read 64 blocks and then give an error 53. Trying to get into the service menu to change volume/squelch gives a not-supported error.
Posted: Tue Feb 24, 2004 10:22 am
by RadioSouth
Looks like a M10, will not work with Maxtrac, need GM300.
Posted: Tue Feb 24, 2004 2:11 pm
by w7com
Thanks RS!
Now, does anyone have a UHF (438-470) codeplug? I, uh, wrote in a codeplug but then noticed that I was in the Maxtrac program. D'oh!
Re: What is this Maxtrac? (it's a M10, now I need a codeplug
Posted: Sun Mar 11, 2012 7:40 am
by UA3ATQ
Best way is to blank logic board and completely reinit radio now.
Assumed that you have all necessary test equipment.
Re:
Posted: Sun Mar 11, 2012 3:50 pm
by Will
w7com wrote:Thanks RS!
Now, does anyone have a UHF (438-470) codeplug? I, uh, wrote in a codeplug but then noticed that I was in the Maxtrac program. D'oh!
I will look for one in my archives.