Batboard

I don't have a manual for the MT1000... Anyone know offhand what the Mot parts numbers are for the plastic for the MT1000 front cover? Is it 1505732R01? And the rear housing? Is it 1505525P01, P02 or P03? Don't need the assembly ID's, just for the molded plastic. Tnx.

-RFB

The front cover number looks good. The three part numbers are all housings. Look at the numbers molded into the plastic and the last number sometimes is stamped in. Usally the last number is different to designate the color plastic.

Hi:

Our friends @ Motorola no longer
will sell all part assemblies for
MT1000

The Front Cover Part Number 1505732R01 Front Cover Plastic is Correct.

Don't forget the NamePlate 3305260Q01


As far as the Main Housing is converned, you
will have to order the individule parts and put it together. ( it is a bit of a hassle )


4205534P01 ( PTT Retainer )
3805187Q01 ( PL Mon button )
6405186Q01 (PL Plate )
3805236Q01 (Actr ptt )
150552P02 Shadow Bronze Housing

OR Bite the Bullet, and order
the NHN6419A MT1000 Housing Complete.

I have a few new Ones if you are interested

As I have indiacted, Motorola no longer
supplies the lower tier assembly

Monty



<font size=-1>[ This Message was edited by: [email protected] on 2002-02-23 17:43 ]</font>

Check with [email protected], his name is Jim Handler and he stocks all the stuff you need at FAIR prices. Tell him Randall sent you.

RP

Hi:

Just to insure you do not get miss-led:

Here are some prices that are close.

Don't forget the NamePlate
( $2.30 ) 3305260Q01


As far as the Main Housing is converned, you
will have to order the individule parts and put it together. Can be a hassle, but the
Plastic Parts will secure very well with
30min Epoxy


( $0.14 )4205534P01 ( PTT Retainer )
( $0.55 )3805187Q01 ( PL Mon button )
( $1.15 )6405186Q01 (PL Plate )
( $0.28 )3805236Q01 (Actr ptt )
( $5.25 )1505525P02 Shadow Bronze Housing

So you can " Build your Own" for under 10.00
OR Bite the Bullet and get a Whole Brand New
Housing with Plate and contacts:

( $29.00 ) NHN6419A

Hope the update helps, and I have all the
parts in stock if you desire to give it a try

Monty

<font size=-1>[ This Message was edited by: [email protected] on 2002-02-24 20:19 ]</font>

Thanks you all for your input. Helped clarify the confusion here.

-RFB