Page 1 of 1
Posted: Mon Mar 04, 2002 6:17 pm
by SYNTORX71MAN
HELP I HAVE SOFTWARE, CABLE AND RIB FOR SABER III BUT I KEEP GETTING A SERIAL OR COM PORT ERROR. I HAVE CHECKED EVERYTHING COULD MY COMPUTER BE TOO FAST??? ANY AND ALL HELP PLEASE!!!! PAT
Posted: Mon Mar 04, 2002 11:23 pm
by williamh
how fast is your computer ??? are you running dos ???? or a window to dos from windows 95+ ??
Posted: Mon Mar 04, 2002 11:27 pm
by Monty
I saw your other post !
Hi:
So long as you have the correct Software ( 7.01.00 is a good choice )
for your radio along with a 386-486-25 w/4mb
of Ram, Factory Motorola Rib ( or suitable
clone ) along with a good Saber Program cable
you should not have much trouble.
Make sure you are using a proper OS like DOS
6.22, and do not tey and use DOS under a Windows application
From the main menu screen, push F9 computer
set up screen, generally chose Com 1 or 2, make sure the com ports are not shared with
another device.
Sabers are pretty healthy radios, but the code plugs can / do become corrupted if you
have a unstable program platform
Avoid just holding wires to the back of the
radio, and cheap, poorly made clones with
exposed componets.( unless you like to experiment alot )
Monty