Batboard

Can anyone out there shed any light on a complete list of commands for the Quantar CLI. For example - if no-one's been there before, if you connect a terminal set to 9600,N,8,1 to the RSS connector, you'll get a ]-O prompt. Entering "dorss" at the prompt gets you an RSS: prompt that lets you set and get many things related to the station. Example: "get freq" tells you the current tx and rx freqs, while "set freq tx 451000000" would set the tx freq to 451 MHz - instantly, even if the station is keyed. I'm interested in what "al" means, as in "al uhso warm" which instantly expires the uhso preheat timer. exit, and reset do what you would expect, as does keyup, and dekey. Also, digital metering in english is available. All this was determined by watching RSS talk to the station, and no disassembly of software was done. The set commands that I've seen so far do not do anything permanent to the station. Codeplug mods involve RSS reading a bunch of memory locations, making changes on the PC, and pushing them back out to memory locations.