Page 1 of 1

MTR2000 for paging

Posted: Wed May 26, 2004 2:14 am
by kgison
Hi guys
Has anyone used an MTR2000 for analogue and digital transmission.

I want to use one for voice transmission and digital paging transmission is this possible and how effectice is it.

Many thanks
Kieran gibson

MTR2000 as Paging XMTR

Posted: Wed Nov 24, 2004 12:01 pm
by Dan562
The MTR2000 T5544 can be used for Analog and Digital Paging. the Paging Encoder must be fed into the J5-A17 Aux Tx Input Port with a 200 uFd capacitor and Deviation set for + 3 KHz on the Service Monitor. The PTT closure must be connected between J5-C9 (High) & J5-C15 (GND).

Dan