Page 1 of 1
Posted: Thu Mar 07, 2002 7:39 pm
by mac70pete
As per my old post about my rss not reading the codeplug, I found out why. The mic connector for my MCX1000 is all messed up. Can someone with a service manual look up the mic connector that is soldered onto the board in the control head so I can get a new one and replace it? On the batlabs mic connector page, it says J4200 and P4200. Are these actual part numbers or is there another number I'll need when ordering? Thanks.
Peter
Posted: Thu Mar 07, 2002 8:29 pm
by Tron
Why not call Mot Parts ID at 800-422-4210?
Tron
Posted: Fri Mar 08, 2002 10:57 am
by ARZ902
On 2002-03-07 22:39, mac70pete wrote:
As per my old post about my rss not reading the codeplug, I found out why. The mic connector for my MCX1000 is all messed up. Can someone with a service manual look up the mic connector that is soldered onto the board in the control head so I can get a new one and replace it? On the batlabs mic connector page, it says J4200 and P4200. Are these actual part numbers or is there another number I'll need when ordering? Thanks.
Peter
Try part # 0900078M01
Dennis