Page 1 of 1
Vehicular bonding jumpers
Posted: Mon Jul 19, 2004 4:46 am
by spareparts
Anyone know a good source of bonding jumpers? Tinned braid with crimped and soldered ends would be preferred. Lugs would be for a 1/4" and 3/8" bolts.
BTW, I don't mind buying a box of them.
Martin
Posted: Mon Jul 19, 2004 9:26 pm
by wx4cbh
I buy the braid on a roll from various wire suppliers and cut to length and solder per installation requirements. Connectors can usually be obtained from the same suppliers.
Posted: Tue Jul 20, 2004 4:47 am
by spareparts
wx4cbh wrote:I buy the braid on a roll from various wire suppliers and cut to length and solder per installation requirements. Connectors can usually be obtained from the same suppliers.
Have been doing that. I was looking to see if buy was more cost effective (and easier) then field assembling.
Martin