Page 1 of 1
Posted: Sun Mar 17, 2002 9:06 am
by ka9vxs
Anyone tell me where to scpe or probe the r.i.c.k. or first place to check for audio to my maxtrac tx. Making a uniderectional repeater.Everything works fine , but no repeat audio on the tx carrier over the air.
Kevin
Posted: Sun Mar 17, 2002 9:19 am
by CHEFA2001
Verify All your cables are completely functional.
Just a thought.
Posted: Sun Mar 17, 2002 9:51 am
by wavetar
Judging from your post, you don't have a copy of the RICK schematic. You can find one here:
http://www.batlabs.com/images/rick.gif
Audio troubles are generally very simple to troubleshoot. Start where it's coming out of your receive radio, and follow the path to the transmit radio. It's probably something simple like the switches in the RICK are set for Flat audio in, and you're using Mic audio in, or something similar to that. Good Luck.
Todd
