Page 1 of 1
Posted: Sun Mar 17, 2002 8:01 pm
by Wes
Looking for Part Number for the Metal Clip that goes on the back of the Systems 9000 Control head to hold the cable in when the plastic clips are broke off. The part number is stamped on the inside of the metal clip you have to take it off the cable to see the number.......I just dont have one to look at.
Thanks in advance...
Wes
Posted: Sun Mar 17, 2002 9:32 pm
by Mike B
Motorola parts ID gave me this number for the metal retainer clip a long time ago:
REX-1070B - Cable Repair Kit
_______
Mike B
[email protected]
Posted: Sun Mar 17, 2002 11:39 pm
by jmr061
Mike is correct. You have to get the whole kit. Even though there is an actual part number on the clip, it only comes as an expensive kit. If you try to order the part number on the clip, it subs to the kit part number.
Jason
Posted: Mon Mar 18, 2002 12:51 am
by techie
So what else comes in the kit?
btw: the part number on the clip I have here is 4205450V01, which does appear to sub to REX-1070B.
Posted: Mon Mar 18, 2002 5:39 am
by Wes
Ok guys. Thanks for the help, but as techie asked....What all comes in this kit????
Wes