Page 1 of 1
Correct port for programming an Astro Consolette?
Posted: Sun Sep 05, 2004 6:32 pm
by Pj
Which is the proper programming port on the rear... 1 or 2?
This has the TRC option, but its working as a standalone unit if it make a difference..
Posted: Mon Sep 06, 2004 12:10 am
by apco25
I think you still have to open the case and prgram the radio directly.
At least that' show my consolette is - the ports on the rear are for the DGT9000 family of digital remotes or tone control.
Posted: Mon Sep 06, 2004 2:11 am
by Pj
I thought I read on here some time ago that you could use one of the rear ports for programming. Tried both, didn't work and ended up cracking open the case. No big deal.
Posted: Mon Sep 06, 2004 5:38 am
by Victor Xray
PJ, did you see the programming tip for AS Consolettes here:
http://www.batlabs.com/astconscbl.html? It says port 3, which if I recall correctly, is the top DB25? It's been a while since I programmed from the rear port but it does work perfectly.
Posted: Mon Sep 06, 2004 10:57 am
by Pj
Yeah, tried both....no go. Could it have anything to do with the TRC option enabled in the radio?