Page 1 of 1
Price and part # for MII keypad assembly.
Posted: Fri Oct 22, 2004 4:43 am
by CTAMontrose
well my shiney new ebay case has a problem (imagine that)
anyway, the buttons on the right hand side of the display (-) and (<) do not do anything, and haev been advised that its probably the button PCB.
how much is this item and what is the part number?
this is for an XTS3000r model II
thanks guys!
marc
Posted: Fri Oct 22, 2004 8:14 am
by mtr12222
Like you said, the problem is most likely the keypad flex, it is very possible the the flex isn't making contact with the controller board. Try re-positioning the bracket and the flex on the controller. The keypad flex is about 30 dollars from M, I also suggest you buy a new shield ($9)and clips (4@ about $.80 each). The keypad flex is adhesive and sticks to the shield.
I would play with the flex bracket for a while ans ensure that all of the pads are making contact on the controller board first. Unless a trace on the flex is nicked I wouldn't replace the the flex. The flexes on the XTS and Astro are much better than the earlier saber flexes.
Posted: Fri Oct 22, 2004 8:18 am
by CTAMontrose
ok ill reseat it, it was a model 1 that i have recently upgraded so ill pull it back apart and make sure its making good connections..
thanks again!
Posted: Fri Oct 22, 2004 8:28 am
by CTAMontrose
ok just cleaned the contacts and no go, i guess ill have to order another assembly
Posted: Fri Oct 22, 2004 8:45 am
by CTAMontrose
i just called motorola and was told the flex was 162.00??
part # 0105957t49
Posted: Fri Oct 22, 2004 10:34 am
by alex
CONTROL UNIVERSAL FLEX LIST is supposed to be $175.96, but that database might be a month or two out of date... Guess it's time to reload it.
Regardless, that's an expensive flex.
-Alex
Posted: Fri Oct 22, 2004 10:36 am
by CTAMontrose
its universal?
i would imagine that to mean it works on all XTSs... lol
all that for 6 buttons and a cable.. jesus /\/\
Posted: Fri Oct 22, 2004 10:38 am
by alex
I probably have a model 3 keypad I could sell you kicking around - but that doesn't really help you much.
If you have a model 3 housing to "rid" yourself of, let's talk.
Maybe we can work something out.
-Alex
Posted: Fri Oct 22, 2004 10:42 am
by CTAMontrose
right on, no unfortunatly i only have the model 1 case and now this pile of crap...
i guess ill just have to deal with it for now, i cant see putting another 162.00 in this just yet..
im still waiting on a response from the seller to see what he wants to do...
DAMN YOU EBAYYYYYYYYYYYYYYYYY
Posted: Fri Oct 22, 2004 2:56 pm
by CTAMontrose
just so we are all clear...
i do NOT need the flex that is connected to the Speaker, mic, CH, ABC, VOL and the side buttons..
what i am after is the one for the 6 buttons on the FRONT of the Model 2
(-) (=) (-)
(<) (H) (>)
^- those -^
i think we are talking about different parts....
Posted: Fri Oct 22, 2004 6:05 pm
by mtr12222
Make sure that the flex is seated properly. I have had to move the bracket ever so slightly to get the left side buttons to work on a couple of Model III's.
The flex that you want is the keypad flex part number NTN 8493 $30.61, also order part #0705368Z01 $7.88 the flex bracket, 2605342Z01 $9.56 front shield and four clips #4205631Z01.
The flex is adhesive on the back and sticks pretty well to the shield. Carefully examine the flex at the point where is comes over the shield on the bottom side to see if any traces are nicked. Again I highly doubt the flex is bad unless of course you can visibly see a problem. check and double check your flex to controller connections.
Posted: Fri Oct 22, 2004 6:14 pm
by CTAMontrose
ok, ill take it apart again tommorow and play with it.. which way did you have to move it?
Posted: Fri Oct 22, 2004 7:14 pm
by mtr12222
Towards the top of the radio.
Posted: Sat Oct 23, 2004 4:22 pm
by CTAMontrose
got it fixed! turns out the metal retaining clip was bent up ever so slightly... fixed that and taa daa buttons!
thanks to everyone on this thread for your help!
marc