Page 1 of 1
AS-3 / MDC ID #'s
Posted: Thu Oct 28, 2004 7:29 pm
by HayesCrestReact
Will my AS-3 display MDC ID #'s?
Posted: Thu Oct 28, 2004 7:46 pm
by KG6EAQ
Yes. Unless they're using MDC Preamble you'll see it after the TX.
Posted: Fri Oct 29, 2004 4:13 am
by Radiogeek97
Another thing to consider is the flashcode; you will have to have the h14 (digital id display) option. Double check the flash on your radio and make sure, that is the first place to start.
good luck
Posted: Fri Oct 29, 2004 11:39 pm
by Dale Earnhardt
if you have the right flash, then go into the RSS and go to Radio wide option then to Display, then I think its under PTT ID, make sure options are turn on, somtimes its not on, and it wont show.
Also, make sure the channel u want to decode MDC, make suure in that personality of that channel that MDC is pick for signalling. and that should do the trick if I remember, its been awhile since I program, and its late right now, ughh...... just thought i throw a quick answer in
Posted: Wed Nov 03, 2004 7:26 am
by MRFLASHPORT
HayesCrestReact,
Make sure you don't enable MDC OR MODAT on the react frequency. The Crusties might get upset with you.
There are a number of people who program your radio, Send me a PM.